Step 3: Adjusting The Picture Position - Sony Bravia VPL-HW10 Operating Instructions Manual

Step 3: Adjusting the Picture Position
Project an image on the screen and then adjust the picture position.
1
ON/STANDBY indicator
5
Lens shift dials
/&;
Remote control /
detector
4
INPUT button
6, 7
Zoom lever,
Focus ring
ttH+-2
1/(9
(On/
standby)
switch
A£AL COlOR PllOCESSIlIl
Tip
The 1/(9 (ON/STANDBY), INPUT, MENU, and
t/..../.../.. /~ (joystick) buttons on the side
panel of the projector function the same as those on the remote control.
mil
Depending on the installation location of the projector, you may not control it with the remote
control. In this case, point the remote control to the screen instead of the projector.
22
ON/STt)NDBY
,
' "
-0-
Lights in red.
"'/\'
1
After connecting the AC cord to
the projector plug the AC cord
into a wall outlet.
The ON/STANDBY indicator lights
in red and the projector goes into
standby mode.