Sony Bravia VPL-HW10 Operating Instructions Manual page 19

To connect to a DVD player/recorder or Blu-ray Disc player/
recorder equipped with HDMI output
You can enjoy better picture quality by connecting a OVO player/recorder or Blu-ray Oisc
player/recorder equipped with HOMI output to the HOMI input of the projector.
Moreover, if you have a Control for HOMI compatible equipment, you can operate the
projector synchronizing with the Control for HOMI compatible equipment. For details,
see the Function
II
menu
(CW'
page 49) and "About the Control for HOMI"
(CW'
page 54).
Speakers
AV amplifier
•
o
o
o
=
Right side of the projector
t
OVO player/recorder or Blu-
ray Oisc player/recorder,
etc., with the HOMI output
t
10
HDMI
oulpul
HOMI cable (not supplied)
~
: Video signal flow
When using an optional HOMI cable, be sure to use
a cable that has acquired the HOMllogo.
--
• When connecting equipment to the HOMI input of the projector, be sure to use
equipment that have acquired the HOMI logo.
• When connecting an HOMI cable to the projector, make sure the'" mark on the upper
part of the HOMI input of the projector and the. mark on the connector of the cable is
set at the same position.
• If the picture from equipment connected to the projector with an HOMI cable is not
clear, check the settings of the connected equipment.
Control for HOMI is an HOMI standard mutual control function which uses the HOMI CEC
(Consumer Electronics Control) specification.
This projector supports OeepColor, x. v.Color, LipSync and computer input signal of HOMI
standards. It also supports HOCP.
19