Regulatory Statements; Safety Symbols - RIDGID SeeSnake CS65-XR Operator's Manual

Introduction
The warnings, cautions, and instruc-
tions discussed in this manual can-
not cover all possible conditions and
situations which may occur. It must
be understood by the operator that
common sense and caution are fac-
tors that cannot be built into this
product, but must be supplied by the
operator.

Regulatory Statements

The EC Declaration of Conformity
(890-011-320.10) will accompany
this manual as a separate booklet
when required.
Directive 2014/53/EU
Operating Spectrum
Radio
/ Power
Bluetooth 2402 – 2480 MHz 14.20
4.0 dBm
Wi-Fi
2400 – 2483.5 MHz 19.90
802.11
dBm
b/g/n
5150 – 5250 MHz 20.46
dBm
Wi-Fi 5250 – 5350 MHz 18.32
802.11 a/n dBm
5470 – 5725 MHz 19.43
dBm
GPS 1559 – 1610 MHz
This device complies with Part 15
of FCC rules. Operation is subject
to the following two conditions: (1)
This device may not cause harm-
ful interference, and (2) this device
must accept any interference re-
ceived, including interference that
may cause undesired operation.
Contains Transmitter Module FCC ID: Z64-
WL18SBMOD.

Safety Symbols

In this manual and on the product, safety
symbols and signal words are used to com-
municate important safety information. This
section is provided to improve understand-
ing of these signal words and symbols.
This is the safety alert symbol. It is
used to alert you to potential per-
sonal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury or
death.
DANGER
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING
WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION
CAUTION indicates a hazardous situation
which, if not avoided, could result in minor or
moderate injury.
NOTICE indicates informa-
NOTICE
tion that relates to the pro-
tection of property.
This symbol means read the man-
ual carefully before using the
equipment. The manual contains
important information on the safe
and proper operation of the equip-
ment.
This symbol means always wear
safety glasses with side shields or
goggles when handling or using
this equipment to reduce the risk
of eye injury.
This symbol indicates the risk of
electrical shock.
CS65 – English – 3
xr