Makita JR3051T Instruction Manual page 5

To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button. To stop the tool from the locked
position, pull the switch trigger fully, then release it.
► 1. Switch trigger 2. Lock button
For tool without lock button
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
► 1. Switch trigger
Hook
Optional accessory
CAUTION:
Always be sure that the tool is
switched off and unplugged when hanging the
tool.
CAUTION:
Never hang the tool at high or
potentially unstable location.
CAUTION:
Do not hook the tool on your belt
or other accessories. The recipro saw blade may
contact your body and cause personal injury.
The hook is convenient for hanging the tool temporarily.
To use the hook, simply lift up hook until it snaps into
the open position.
When not in use, always lower hook until it snaps into
the closed position.
1
2
► 1. Hook
Attach the hook by following procedure.
1.
1
► 1. Notch 2. Cover
5 ENGLISH
Insert the tip of slotted screwdriver into the notch
and remove the the cover by pressing and sliding
it.
1
2
1