Advertisement
4. Specifications
General
Dimensions (w/h)
Main board:
Connector panel: 33 x 85 mm
Mass
Main board:
Connector panel: approx. 100 g
Power requirements
+5 V dc: 1.0 A (supplied from PFV-L1/L10)
Power consumption
approx. 5 W
Serial digital inputs/outputs
Channel coding
Scrambled NRZI
Transmission speed
270 Mbit/s
Amplitude/impedance 0.8 V p-p ± 10 %, 75 Z
Cable length
200 m max. (when using a recommendation cable)
Input/output return loss 15 dB or more (5 MHz to 270 MHz)
Signal format
Conforms to SMPTE 259M
4:2:2 component serial digital video signal (525/60 and 625/50 systems)
Serial digital interface
Input connectors
SDI IN connectors (BNC type) (2)
Output connectors
Active-through output connectors (BNC type) (2)
Analog outputs
Output connectors
VIDEO OUT connectors (BNC type) (6)
NTSC composite video signal (525 mode only)
PAL composite video signal (625 mode only)
Video characteristics
Sampling frequency
27 MHz
Digitization
10 bits (interpolating 8 bits to 10 bits.)
Bandwidth
5 MHz
Y/C phase error
20 ns or less
Signal-to-noise ratio
54 dB or more (when the lamp signal is input)
DG (Differential gain) 2 % or less
DP (Differential phase) 525 mode: 2d or less
625 mode: 3.5d or less
approx. 2 us
System delay
Design and specifications are subject to change without notice.
BKPF-L632
267 x 77 mm
approx. 140 g
1.0 V p-p, 75 Z (incl. sync 286 mV)
(Defined with the color bars signal 100/7.5/77/7.5)
1.0 V p-p, 75 Z (incl. sync 300 mV)
(Defined with the color bars signal 100/0/75/0)
3 (E)
Advertisement
