Page 1
MONITORING COMPOSITE ENCODER BOARD BKPF-L632 ! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
The three connectors output the same signal. Attaching BKPF-L632 4 CH2 SDI IN (CH2 serial digital signal input) BKPF-L632 is designed to be installed and operated in the connector interface unit PFV-L1 or PFV-L10. Accept a 4:2:2 component serial digital video signal.
Page 4
S2 is set to ON 1 D4 _5V WARNING Green/red Green: A power supply of _5 V is normal Red: A power supply of _5 V is abnormal 2 (E) BKPF-L632...
54 dB or more (when the lamp signal is input) DG (Differential gain) 2 % or less DP (Differential phase) 525 mode: 2d or less 625 mode: 3.5d or less approx. 2 us System delay Design and specifications are subject to change without notice. 3 (E) BKPF-L632...
Page 6
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any...