2.6.3 Mini-Card Installation
Step 1: Locate the mPCIe/mSATA slots. Remove both mounting screws from board.
CN45
CN44
Step 2: Insert the mPCIe/mSATA Mini-Card into CN45 at an angle (approx. 30°). Press
down gently and secure with a mounting screw. Repeat for inserting the next
mPCIe/mSATA Mini-Card into CN44.
Step 4: Replace bottom panel by inserting at an angle and then swinging shut. Secure
bottom panel with two screws.
Chapter 2 – Hardware Information
29