11/09/05 18:02:03 32ZY0620_045
(XH type/R type/G type/T type)
TRANSOM ANGLE
ADJUSTING ROD
UNLOCKED
POSITION
LOCKED POSITION
Inserting the adjusting rod in the
proper hole, twist it down to lock.
After locking, pull the adjusting rod
and be sure it is not withdrawn.
(manual tilt SH type/LH type)
TO CHANGE
TRANSOM ANGLE
ADJUSTING ROD
LOCKED POSITION
TO LOCK
Pinch the adjusting rod end and pull
out to remove.
Inserting the adjusting rod in the
proper hole, and lock it. After
locking, pull the adjusting rod and be
sure it is not withdrawn.
INSTALLATION
To prevent damage to the
outboard motor or boat, make sure
the adjusting rod is locked.
PINCH
45