11/09/05 18:20:04 32ZY0620_139
〈
〉
Engine overheats
1.
Water intake port and/or
water check hole are/is
clogged.
2.
Engine is overloaded
because of unequally
distributed passengers or
excessive load on the
boat.
〈
〉
Engine overrevs
1.
Cavitation.
2.
Propeller is damaged.
3.
Unmatched propeller is
selected.
4.
Trim angle is not correct.
Clean water intake
port and/or water
check hole.
Distribute the
passengers equally.
Do not load on the
boat excessively.
Install the outboard
motor in the proper
position.
Replace propeller.
Consult with an
authorized Honda
outboard motor dealer.
Trim to correct angle.
TROUBLESHOOTING
139