Table of Contents
Advertisement
'n' for 802.11n
WPS icon
access point uses encryption, a key icon
Note: When the access point supports WPS and WPS icon
you will not see the key icon
encryption.
D
Shows the signal strength of access point by percentage.
E
Shows the bar graph of the signal strength.
If you can not see the access point you wish to connect here, please click
'Rescan' button to scan for access point again, until the one you preferred is
displayed. You may have to click 'Rescan' for more than two times before you
can see the access point you wish to use here.
If you still can not see the access point you wish to use after clicking 'Rescan'
for more than five times, please move your computer closer to the location
where the wireless access point is, or see instructions in Chapter 4-2
'Troubleshooting'.
If you wish to see detailed information for a specific access point, please
double-click on it, and you'll be provided with its detailed information.
ViewSonic WPD-100
, 'g; for 802.11g
will appear when the access point supports WPS. If the
, and 'b' for 802.11b
will appear.
here even through the access point uses
.
is appeared,
12
Advertisement
Table of Contents
