Using Wpd-100 Utility - ViewSonic WPD-100 VS13789 User Manual

2-2-1 Using WPD-100 Utility

Please follow the following instructions to use WPD-100 utility to connect to
wireless access point.
1. Right-click the WPD-100 utility icon located at lower-right corner of
computer desktop and then clicks 'Launch Config Utility'.
2. WPD-100 utility will launch, and begin to scan for all wireless access points
automatically.
WPD-100 consists two parts: Menu and setup area. You can select a setup
function (Profile, Network, etc.) from menu, and corresponding setup items
will be displayed at setup area.
Some function includes more information, and can not be fitted in setup
area. In this case, you can click 'More / less' button to expand the setup
utility window, to display more information:
You can click 'More / Less' button again, and setup utility window will
resume to its original size.
Tip: If a setup item requires more information to complete the setup
procedure, the setup utility window will expand automatically.
ViewSonic WPD-100
Menu
Setup
Area
More / Less
button
9