Power And Sound Controls - Panasonic CQ-MR505N Service Manual

Power and
E
N
G
Sound
L
I
S
H
Controls
2
PWR
MODE
12
Power
Turn the key in the ignition until the accessory indicator lights.
Press [SOURCE](PWR) to switch on the power.
Press and hold [SOURCE](PWR) again for more than 2 seconds to
switch off the power. When the power is switched off, the panel removal
alarm sounds. (See page 34 about the panel removal alarm.)
Note: When the power is switched on for the first time, a demonstration
message appears on the display. To cancel this display, press [ • ]
(DISP/CT).
Volume
¡ Press [jVOL] or [iVOL] to increase or decrease the volume.
¡ Press and hold [jVOL] or [iVOL] for more than 0.5 seconds to
change the numeric level in sequence.
Note: In the VOLUME mode, the display will be back to regular opera-
tion mode with no operation for more than 2 seconds.
Anti-Volume-Blast Circuit
This unit has a safety function which slowly raises volume level when power
is switched back on after it is turned off at a specific level (20) or higher.
Mute
(ATT)
¡Press [MUTE] to mute the sound completely.
MUTE
VOL
¡Press [MUTE] again to cancel.
CQ-MR505/MR303N
(Only for Remote Control)
8
Volume Level (0 to 40)
CT
EO N PT Y
T A
R E G
A F