Fm Operation; Switching From Dab To Fm Mode; Auto Scan; Manual Scan - Hitachi KHD101E Instruction Manual

FM Operation

Switching from DAB to FM Mode

To switch the unit from DAB to FM mode, press DAB/FM once.

Auto Scan

To search for an FM station, press
forward or reverse scanning. "Scanning..." will show on the display. Once
a station has been found, the scanning will stop automatically.

Manual Scan

To search for FM stations manually, press
desired frequency is reached.
With FM radio, it may be necessary to fine tune each station by pressing
/
repeatedly. Each press will adjust the frequency by 0.05 MHz. If
reception is still poor, adjust the position of the aerial or try moving the
radio to another location.

Scan Setting

This is a scanning option to scan all stations, or just scan stations with
strong signal.
1. Press Menu and then press
to confirm.
to select <All stations> or <Strong stations only>. Press
2. Press /
Enter to confirm.
and then Press Enter to start the
/
/ repeatedly until your
to select <Scan setting>. Press Enter
/
GB
25