Table of Contents
Advertisement
FM Operation
Switching from DAB to FM Mode
To switch the unit from DAB to FM mode, press MODE once.
GB
Auto Scan
To search for an FM station, press
to start the forward or reverse scanning. "Scanning..." will show on
the display. Once a station has been found, the scanning will stop
automatically.
Manual Scan
To search for FM stations manually, press
your desired frequency is reached.
With FM radio, it may be necessary to fine tune each station by pressing
TUN/CH repeatedly. Each press will adjust the frequency by 0.05 MHz.
If reception is still poor, adjust the position of the aerial or try moving the
radio to another location.
Scan Setting
This is a scanning option to scan all stations, or just scan stations with
strong signal.
1. Press and hold MENU/INFO and then press
<Scan setting>. Press SELECT to confirm.
2. Press
Press SELECT to confirm.
22
TUN/CH
to select <All stations> or <Strong stations only>.
TUN/CH
and then press SELECT
TUN/CH
TUN/CH
repeatedly until
to select
Advertisement
Table of Contents
