Procedure: Code Download D20 Base - GE D20 Installation And Operation Manual

D20/D200
Installation and Operations Guide
D20/D200 Software Configuration
Procedure: To download a flash code file to a D20 Base type of D20ME module.
Code Download
D20 Base
Step
1
2
3
4
5
6
7
Optional Step 1: Speed-up communications to shorten download time.
8
9
102
, continued
Code Download for D20 Base type D20ME
Restart the D20ME.
As soon as messages display on the monitor, press the Esc key within 5
seconds.
Result: You are prompted with the message:
generate a default configuration? (y/n)"
Type y (or Y).
Results: The current configuration file is overwritten with the default
configuration. The 68K Monitor is initiated.
Press .
ENTER
Result: The 68K Monitor login dialog screen appears
To login: for Login: type westronic and press
Password: type rd and press
Results: A Welcome message appears, followed by the D20M> prompt.
Type sp to suspend all processes running on the D20ME
Type erase to clear the flash. This will take several seconds.
Result: Flash Erased will be displayed when completed
Type Baud 38400 and press
Note: Speeds up to 230.4 kbps, or lower speeds may be chosen based
on ambient EMI, WESMAINT cable length, PC and
communication software limitations, etc. Refer to "Appendix
D: Changing the Baud Rate", page 127 for supported speeds.
Result: The monitor will now be communicating at 38.4 kbps
Configure the terminal emulator software to communicate at the same
speed, and reconnect to the 68K monitor.
994-0078-2.00-7
Action
"Are you sure you wish to
.
ENTER
.
ENTER
.
ENTER
GE Energy
, then for
General
Full