Unpacking The Cisco Asr 9906 Router - Cisco ASR 9000 Series Installation Manual

Unpacking the Cisco ASR 9906 Router

1 Shipping pallet
2 Top corrugated
packaging cap
3 Corrugated
packaging accessory
tray
Step 5
Remove components, such as line cards, power supplies, and the fan tray, to reduce the weight before lifting
or moving the chassis. See
information.
Step 6
Save the packaging materials in case the router needs repackaging or shipping.
Unpacking the Cisco ASR 9906 Router
Follow these steps to unpack the Cisco ASR 9906 Router from its shipping container (see the figure below).
Procedure
Step 1
Cut the straps that secure the cardboard shipping container to the pallet.
Step 2 Remove the three connecting clips.
Step 3
Remove the cardboard shipping container.
Step 4 Remove the accessory tray and chassis accessories.
Step 5
Remove the packaging material (see the figure below).
a) Remove the foam packaging material from the top of the router.
b) Remove all screws that secure the two hold-down brackets to the router chassis.
c) Remove four bolts per hold-down bracket that secure the brackets to the pallet.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
62
4 Foam packaging
material(top cap)
5 Foam packaging
material (bottom
cap)
6 Corrugated
packaging (lower
tray)
Removing Components Before Installing the Chassis, on page 74
Unpacking and Installing the Chassis
7 Cardboard shipping
container
for more