Searching For Wiring Resin Pipes In Concrete - Makita DWD181 Instruction Manual

Operation

Searching for wiring resin pipes in concrete

• Scan mode: Multi Detection (*)
• Scene: Dry Concrete
(*) For wiring resin pipes, which are
often meandering unlike iron bars, it
is recommended the Multi Detection
mode which can scan three lines be
used.
1. Place masking tape to the concrete surface to show scan lines in a square
shape of 60 cm (23 5/8").
1
A
2
B
2. Turn on the scanner.
If the scanner has already been switched on, press the mode button (
3
4
5
6
41
1
1. Resin pipe
2. Concrete
1. Masking tape
2. Three lines to be scanned
3. Upper line
4. Middle line
5. Lower line
6. Operation start line
A: 30 cm (11 13/16")
B: 60 cm (23 5/8")
2
).