Service Mode - Panasonic FP-D250 Series Manual

5.2 Service mode

(1) F4 mode
1) Input check
Code
Function
No.
c15
a) 2 bin finisher paper exit
sensor (inverting exit)
b) 2 bin finisher paper pass
sensor
c) 2 bin finisher paper exit
sensor (straight exit)
d) 2 bin finisher paper feed
sensor
c16
a) 2 bin finisher dust box
detecting sensor
b) 2 bin finisher belt home
position sensor
c) 2 bin finisher jogging home
position sensor
d) 2 bin finisher set switch
c17 a) 2 bin finisher stapler cartridge
detecting sensor
b) 2 bin finisher staple detecting
sensor
c) 2 bin finisher stapler home
position sensor
d) 2 bin finisher sheet
detecting sensor
c18
a) 2 bin finisher elevator bin
lower limit sensor
b) 2 bin finisher paper top
detecting sensor
c) 2 bin finisher paper full
detecting sensor
d) 2 bin finisher elevator bin
upper limit sensor
5-2
Condition
7
Paper is detected.
Paper is detected.
Paper is detected.
Paper is detected.
Dust box is not
detected.
Belt in home position.
Jogging in home
position.
2 bin finisher is pulled
out.
Cartridge is installed.
Staple is detected.
Stapler in home position.
Paper is detected.
Bin is placed beyond
the lower limit.
Paper is detected.
Paper is not detected.
Bin is placed beyond
the upper limit.
Message display
4 3 2 1 0
6 5