Advertisement
charge the battery.
Checking the chain
The sag must be between 10-15mm
Adjusting the sag
Loosen the rear axle first than
adjust the small adjustor nuts equally.
Maintain the chain line.
If the sag is not between 10-15mm, it
might cause the chain to fall off or break the chain.
How to check the brake system
Check
The distance between lever and handle bar should
be 25mm-35mm.
Adjusting
Clockwise/Anticlockwise adjust the bolts in
order to meet the standard (25mm-35mm).
If you still cannot brake appropriately, you can adjust
the inner brake cable length.
How to adjust the height of the handle bar and seat
This job is best done by a mechanic.
The allen(hex) screw has to be loosened.
Never raise the handlebar to beyond
the safety line shown on right picture.
You must tighten to the torque 20N•m
If the height of the saddle is not suitable
you can adjust the seat height
Advertisement
