Information Codes - Samsung NX60 Series User Manual

Troubleshooting
Problem
Food does not The wrong cooking mode
bake or roast was selected.
properly in the
The oven racks have not
oven.
been positioned properly
for the foods being
cooked.
Incorrect cookware or
cookware of improper
size is being used.
The oven temperature
needs to be adjusted and
recalibrated.
There is aluminum foil
on racks and/or oven
bottom.
The clock or timers are
not set correctly.
Food does not The oven controls are not
broil properly in set properly.
the oven.
The oven door was not
closed during broiling.
The rack has not been
properly positioned.
48 English
NX9000T_NX60T8511SS_AA_DG68-01221A-00_EN.indd 48
Cause Action
See page 22.
See page 21.
See page 18.
See page 32.
Remove foil.
See pages 15
See page 24.
See page 24.
See the broiling guide on page
24.

Information codes

Code symbol Meaning
Oven sensor malfunction.
The oven is overheating.
Check the Control PBA NTC
Sensor.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal malfunction.
Oven vent blocked.
** If these solutions do not solve the problem, contact a local Samsung service
center or call 1-800-SAMSUNG (1-800-726-7864).
Solution
1. Press OFF/CLEAR, and then
restart the oven.
2. If the problem persists,
disconnect all power to
the oven range for at
least 30 seconds and then
reconnect the power.
1. If oven vent or cover air is
blocked by aluminum foil
or others, remove that and
restart oven.
2. To reset error, disconnect
power or tap OFF/CLEAR
after opening the oven door
at least 60 seconds.
2020-03-25 6:12:09