Steps
1. Remove the liner behind the VR heatsink module.
2. Align and adhere the VR heatsink on the system board.
3. Tighten the two captive screws that secure the VR heatsink to the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Speaker
Removing the speaker
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the speakers and provide a visual representation of the removal procedure.
after working inside your
computer.
before working inside your
computer.
Disassembly and reassembly
65