Opening And Closing The Server; Opening The Server - Fujitsu PRIMERGY CX122 S1 Service Supplement Manual

4.1.4

Opening and closing the server

4.1.4.1

Opening the server

Ê Remove the server from the system umit as described in
a PRIMERGY CX122 S1 server from the system unit" on page
V
CAUTION!
When removing a PRIMERGY CX122 S1 server from the system unit
that is not replaced immediately, always install a dummy cover in the
empty installation bay. For further information please refer to
"Installing a server dummy cover" on page
Figure 13: Opening the server (A)
Ê Loosen two screws on the server rear.
PRIMERGY CX122 S1
Service Supplement
Preparations
section "Removing
19.
28.
section
31