Acquisition Commands for Setting Values
This section describes the commands for acquiring setting values of the printer.
Acquisition commands for mode setting values for end print signal (output)
[Format]
~H(CNA,B
[Parameter] None
[Function]
Acquire the mode setting values for the end print signal.
Return value after
executing this command
0
1
2
3
4
Acquisition commands for mode setting values for data ready signal (output)
[Format]
~H(CNA,A
[Parameter] None
[Function]
Acquire the mode setting values for the print data preparation complete (print data deployed) signal.
Return value after
executing this command
0
1
2
38
End print signal OFF (End print signal not output)
End print signal (pin 18) set to Normal: High, When feeding paper: Low
End print signal (pin 18) set to Normal: Low, When feeding paper: High
End print signal (pin 18) set to Normal: High, When continuous printing ends and the
printer stops at the predetermined position:
Low for 20 msec.
End print signal (pin 18) set to Normal: Low, When continuous printing ends and the
printer stops at the predetermined position:
High for 20 msec.
Data ready signal (pin 23) OFF (not output).
Data ready signal (pin 23) set to Normal: High,
When print data preparation is complete: Low
Data ready signal (pin 23) set to Normal: Low,
When print data preparation is complete: High
Description
Description