Cisco Firepower 2100 Series Getting Started Manual page 77

ASA Deployment in Platform Mode
• DNS servers—OpenDNS servers are pre-configured.
The configuration consists of the following commands:
interface Management1/1
management-only
nameif management
security-level 100
ip address 192.168.45.1 255.255.255.0
no shutdown
!
interface Ethernet1/1
nameif outside
security-level 0
ip address dhcp setroute
no shutdown
!
interface Ethernet1/2
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
no shutdown
!
object network obj_any
subnet 0.0.0.0 0.0.0.0
nat (any,outside) dynamic interface
!
http server enable
http 192.168.45.0 255.255.255.0 management
!
dhcpd auto_config outside
dhcpd address 192.168.1.20-192.168.1.254 inside
dhcpd enable inside
!
ip-client outside
!
dns domain-lookup outside
dns server-group DefaultDNS
name-server 208.67.222.222 outside
name-server 208.67.220.220 outside
FXOS Configuration
The default factory configuration for FXOS on the Firepower 2100 configures the following:
• Management 1/1—IP address 192.168.45.45
• Default gateway—ASA data interfaces
• Firepower Chassis Manager and SSH access—From the management network only.
• Default Username—admin, with the default password Admin123
• DHCP server—Client IP address range 192.168.45.10-192.168.45.12
• NTP server—Cisco NTP servers: 0.sourcefire.pool.ntp.org, 1.sourcefire.pool.ntp.org,
2.sourcefire.pool.ntp.org
• DNS Servers—OpenDNS: 208.67.222.222, 208.67.220.220
• Ethernet 1/1 and Ethernet 1/2—Enabled
Firepower 2100 Platform Mode Default Configuration
Cisco Firepower 2100 Getting Started Guide
75