Yamaha CP33 Service Manual page 38

CP33
5. MIDIコードでのテストプログラム
テスト後、 項目選択にするには A2, 00, 00 を送ってからテスト項目のMIDIコードを送ってください。
テスト No. テスト項目
1 Version
2 Master ROM Check1
3 Slave ROM Check1
4 RAM Check1
5 Flash ROM Check1
TG1 Check
9
10 TG2 Check
11 Pitch Check
12 Output Level R Check
13 Output Level L Check
14 EQ LOW
15 EQ MID
16 EQ HIGH
17 SW,LED Check
18 All Panel LED On Check
19 All Red LED On Check
21 All Amber LED On Check
26 Aux Pedal Check
28 Sustain Pedal Check
29 PB Wheel Check
38
MIDI コード
A0, 01, 00 F0, 43, 73, 01, 68, 00, 00, 00, 00, F7 :
F0, 43, 73, 01, 68, 01, V1, V2, V3, F7 :
F0, 43, 73, 01, 68, 02, V1, V2, V3, F7 :
F0, 43, 73, 01, 68, 00, 00, 00, 7F, F7 :
＜ V1, V2, V3 ＞ Version Number （ASCII code)
A0, 02, 00 A1, 02, 00 : Item change
A0, 02, 02 : OK （ A0, 02, 03 ：NG ）
A0, 03, 00 A1, 03, 00 : Item change
A0, 03, 02 : OK （ A0, 03, 03 ：NG ）
A0, 04, 00 A1, 04, 00 : Item change
A0, 04, 02 : OK （ A0, 04, 03 ：NG ）
A0, 05, 00 A1, 05, 00 : Item change
A0, 05, 02 : OK （ A0, 05, 03 ：NG ）
A0, 09, 00 A1, 09, 00 : Item change
Checks the Sound Source.
A0, 0A, 00 A1, 0A, 00 : Item change
Checks the Sound Source.
A0, 0B, 00 A1, 0B, 00 : Item change
Checks the Pitch.
A0, 0C, 00 A1, 0C, 00 : Item change
Checks the R channel output.
A0, 0D, 00 A1, 0D, 00 : Item change
Checks the L channel output.
A0, 0E, 00 A1, 0E, 00 : Item change
Checks the EQ-LOW frequency.
A0, 0F, 00 A1, 0F, 00 : Item change
Checks the EQ-MID frequency.
A0, 10, 00 A1, 10, 00 : Item change
Checks the EQ-HIGH frequency.
A0, 11, 00 A1, 11, 00 : Item change
[TRANSPOSE] 90, 30, 7F → 90, 30, 00 ・・・→
→[PANEL LOCK] 90, 4E, 7F → 90, 4E, 00
A0, 11, 02 : OK
A0, 12, 00 A1, 12, 00 : Item change
Check that all LEDs light up.
A0, 13, 00 A1, 13, 00 : Item change
Check that all red LEDs light up.
A0, 15, 00 A1, 15, 00 : Item change
Check that all amber LEDs light up.
A0, 1A, 00 A1, 1A, 00 : Item change
91, 3C, 7F →[Press] 91, 3C, 00 → 91, 48, 7F
→[Release] 90, 48, 00
A0, 1A, 02 : OK
A0, 1C, 00 A1, 1C, 00 : Item change
91, 3C, 7F →[Press] 91, 3C, 00 → 91, 48, 7F
→[Release] 90, 48, 00
A0, 1C, 02 : OK
A0, 1D, 00 A1, 1D, 00 : Item change
E1, 40, 00 →[DOWN start] E1, 3E, 00 ・・・
→[DOWN end] E1, 00, 00 → [CENTER start]
E1, 05, 00 ・・・→[CENTER] E1, 40, 00
→[UP start] E1, 41, 00 ・・・→[UP end]
E1, 7F, 00 → A0, 1D, 02 : OK （ A0, 1D, 03 ：NG ）
MIDI 出力
START
Master Wave1
Slave Wave2
END