Device Front View; Device Rear View And Lamps - Fujitsu GW1500 Getting Started Manual

GW1500 Getting Started Guide
- Product Warranty
- Safety Precautions
1.1.2

Device Front View

- FCC certification label
- Warning label
- Lamps
1.1.3

Device Rear View and Lamps

- SERIAL (RS-232C, D-sub 9 pins) A port used to connect to the serial device. It
- ETH1 (10/100BASE-TX)
- ETH0 (10/100BASE-TX)
- Power connector
- Cord retainer clip
The warranty for this device.
This manual contains important information about the safe use
of the device.
FCC certification label
Indicates a certification label for FCC/ICES-3.
Indicates precautions for using this device.
For details, refer to
page 15.
Cord Retainer Clip
Power Connector
operates as a DCE.
A port used to connect to the IP device. It operates
as an MDI-X. Supports Auto MDI/MDI-X.
Used as a center-side port. It operates as an MDI.
Supports Auto MDI/MDI-X.
Connects with the included DC cord or AC adapter
(option).
Nylon clips to fasten the included DC cord or AC
adapter (option) to the device.
Warning label
"1.1.4 Device Top View and Lamps" on
14
Lamps
Chapter 1 Overview