Fujitsu AIRSTAGE UTY-ABGXZ1 Instruction Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Gateway
  5. AIRSTAGE UTY-ABGXZ1
  6. Instruction manual
Fujitsu AIRSTAGE UTY-ABGXZ1 Instruction Manual

Fujitsu AIRSTAGE UTY-ABGXZ1 Instruction Manual

Gateway for vrf system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
•INSTALLATION
•SETTING
•OPERATING
®
BACnet
Gateway
for VRF System
UTY-ABGXZ1
Ver. 3.0
PART NO. 9708568010-13

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu AIRSTAGE UTY-ABGXZ1

Summary of Contents for Fujitsu AIRSTAGE UTY-ABGXZ1

  • Page 1 INSTRUCTION MANUAL •INSTALLATION •SETTING •OPERATING ® BACnet Gateway for VRF System UTY-ABGXZ1 Ver. 3.0 PART NO. 9708568010-13...
  • Page 2 GATEWAY for VRF SYSTEM” License Agreement (“LICENSE AGREEMENT”) is a legal agreement between ® you and Fujitsu General Limited (“FGL”) for the use of VRF BACnet GATEWAY products consisting of computer software and online, electronic and/or printed documentation (collectively “SOFTWARE PRODUCT” or “SOFTWARE”). By installing, copy- ing, or otherwise using the SOFTWARE PRODUCT, you accept to be bound by all of the terms and conditions of this LICENSE AGREEMENT.
  • Page 3 This LICENSE AGREEMENT shall be agreed based on the English language. The text in order language is made for reference purpose only and if there are any discrepancies between the English text and the text in other language, the English text shall prevail. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 4: Table Of Contents

    “Adaptor Setting” ······························································································ 42 “Unit Registration” ····························································································· 43 “Description Property Setting” ·············································································· 46 “Change Password” ··························································································· 47 “Display Language Setting” ················································································· 48 7-10 “License Manager” ···························································································· 49 7-11 “Monitoring Unit Setting” ····················································································· 50 Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 5 American Society of Heating, Refrigerating and Air-Conditioning Engineers, INC (ASHRAE). ® XLON is a registered trademark of DH electronics GmbH. Portions of this software ©2001-2017 PolarSoft Inc. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 6: Usage Precautions

    OpenLDV (U10 USB Network Interface driver) WIBU-KEY driver This product may be updated without prior notice. If by chance you encounter any trouble with this product , check with your service personnel for updates. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 7 When Anti-Virus software is running, an error may occur in this software. Set the Anti-Virus software to exclude this software from being monitored. Please refer to your Anti-Virus software manual on how to do this. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 8: How To Use This Manual

    The Appendix is made up of product specifications, error code table, and FAQ. Read them as required. Interface Specification document is also available and should be referred to along with this manual. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 9: Introduction

    Introduction 3. Overview 4. Materials To Be Prepared Beforehand 5. Software License...

  • Page 10: Overview

    VRF System, Indoor and Outdoor Units are up to 400 units and up to 100 units respectively. VRF System Address: ® The numbers from 0 to 3, which are assigned to each VRF System in the BACnet Gateway. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 11: Materials To Be Prepared Beforehand

    This software is necessary to use WIBU-KEY ® It is usually installed automatically when BACnet Gateway is installed to the PC. When the driver for WIBU-KEY is installed manually, execute it. LicenseAgreement LicenseAgreement.pdf ISSetupPrerequisites Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 12: Software License

    License Manager for VRF System” is installed together at the time of BACnet Gateway installation. BACnet Gateway When used by inserting “License” When used by moving “License” stored WHITE-USB-Key into PC as it from WHITE-USB-KEY into PC is. (Status at the time of purchase) Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 13: Installation

    Installation 6. Installation...

  • Page 14: Installation

    ® This section also describes how to uninstall the software when BACnet Gateway software becomes un- necessary and also, how to reinstall the installed software due to software upgrading or other reasons. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 15: Installation Flow

    Do not insert U10 USB network interface adaptor to the USB slot of the PC BEFORE its driver is installed.  Do not turn on the power of indoor/outdoor units until all installation work is completed. Do not insert WIBU-KEY to the USB port of the PC until instructed. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 16: Hardware Installation (Transmission Adaptor)

    (Field Supply) It is necessity that set Transmission adaptor respectively because of the S/V series and V-II or later (V-II/ J-II/VR-II/J-IIS/V-III/J-III) series can not be connected to the same communication line. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 17 Connect the U10 USB Network Interface adaptor to the personal computer USB port. When there are multiple U10 USB Network Interface adaptors, connect each U10 USB Network Inter- face adaptor in the order of its LON number. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 18: Wiring And Turning On The Units Power

    Make sure that USB equipment (USB hub, etc.) that this product is connected to, is not overloaded (power sup- plied thru the interface does not exceeds the maximum limit).  ® Turn on the power for BACnet Gateway PC, if it is not yet turned on. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 19: Software Installation

    SQL Server Express ® ® Microsoft SQL Server Express is installed automatically if it is not already installed.  Select the language. Select the desired language.  Click the “OK”button.   Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 20 (The “sxs“ folder is where the .NET Framework components are stored). Ex. D:\windows8\sources\sxs  Note Installation of .NET Framework 3.5 requires few minutes to complete. Do not operate the screen until the installation is completed. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 21 When “Install” is selected, installation begins. (a) When “ReadMeFirst.txt” is selected, ReadMe is displayed. Note Be sure to read it for important information. (b) When “Manual” is selected, the manual is displayed.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 22 “Next” button.    Specify the installation “Destination Folder” and click the “Next” button. (To change the installation “Destination Folder”, click the “Change” button and select the folder to be installed.)  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 23 If the installation setting contents are correct, click the “Install” button.  Installation starts. The necessary drivers are also installed at the same time. WIBU-KEY Setup  A description of WIBU-KEY Setup is displayed. Confirm the contents. Click the “Next” button.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 24 Click the “Next” button.    When the screen to specify the installation “Destination Folder” is displayed, specify the installation “Destination Folder” and click the “Next” button.  Click the “Yes” button. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 25   If the WIBU-KEY driver installation contents are displayed, confirm the contents and click the “Next” button.   Installation starts. When “Next” button is enabled, click the “Next” button.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 26 Uncheck the checkbox and click the “Finish” button.   WIBU-KEY Setup was successful. Click the “OK” button.  License Manager Installation  A description of License Manager Setup is displayed. Confirm the contents. Click the “Next” button.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 27 If it is not necessary to change the destination, click the “Next” button and go to the next step.   Decide the installation. Click the “Install” button to start the installation.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 28 PC is booted. ® For 7/8.1/10: The BACnet Gateway is registered at the task scheduler. When deleting, start the task scheduler and delete. Control Panel - Administrative Tools - Task Scheduler 7/8.1/10 Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 29 USB port of PC after PC reboot. When the WHITE-USB-KEY is available and the License is in WHITE- USB-KEY, insert the WHITE-USB-KEY into USB port of PC. When the License is in PC, remove WHITE-USB-KEY from USB port for storage. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 30: Software Uninstallation

    6-4-2 WIBU-KEY Driver Uninstallation ® ® 6-4-3 Microsoft SQL Server Uninstallation and Native Client Uninstallation Note ● Refer to the License Manager Manual for the uninstallation of the License Manager for VRF System. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 31: Bacnet ® Gateway Uninstallation

    Gateway remains in the folder designated the BACnet ® Gateway installation folder at installation even though uninstallation is performed. There is no problem even if this folder remains as is, but it doesn’t matter if the folder is deleted. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 32: Wibu-Key Driver Uninstallation

    Remove WIBU-KEY from the PC before uninstalling it.  Select the menu items in order of “start”→“Control Panel”→“Program and Features”.  Select “WIBU-KEY Setup (WIBU-KEY Remove)”.  Click the “Uninstall/Change” button.    Click the “Next” button.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 33 When this screen is displayed, uninstallation of the WIBU-KEY driver is complete. Click the “Finish” button.   Close the “Program and Features” screen by clicking the [x] at the top right-hand corner of the screen. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 34: Microsoft Sql Server Uninstallation

      After this, follow the instructions on the screen. For details, refer to the Microsoft website.  When uninstall is ended, uninstall "Microsoft SQL Server Native Client" in the same manner Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 35: Settings

    Settings 7. Basic Settings 8. Electricity Charge Apportionment (ECA) Setting...

  • Page 36: Basic Settings

    Scanning range ● Device confirmation Cancel ® ® BACnet Gateway Main screen BACnet Gateway program ends. program ends. (When Cancel is selected, Setting is stopped. Setting must be repeated from the beginning.) Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 37 ● Items Which Can Be Arbitrarily Set 7-7 “Description Property Setting” 7-8 “Change Password” 7-9 “Display Language Setting” 7-11 “License Manager” 7-11 “Monitoring Unit Setting” Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 38: Selection Of Unit Data Acquisition Method

    At the end of an application, at DB importing, etc. the password input screen is displayed the same as up to now. This setting can be changed by 7-4 Initial Setting screen and 7-8 Change Password screen.  Click the “OK” button. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 39: Initial Setting

    Select the menu items in order of “Setting”→“Initial setting” from the Menu bar.   Input or check each item of the screen shown below. Always set “IP Address” and “Subnet Mask". Change other items as required.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 40 “Omit Login screen at startup” At the end of an application, at DB importing, etc. the password input screen is displayed the same as up to now. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 41 Temperature unit can only be selected from this screen. It is not possible to change the temperature unit from BMS. The temperature unit should not be changed during operation. If changed, the user must notify the BMS of the change. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 42: Adaptor Setting

    Transmission adaptor (U10 USB Network Interface). (Default name: “AdaptorX”) “Device Name” is a name automatically allocated to the network when a “Transmission adaptor” (U10 USB Network Interface) is connected. (User may select the LONx number) Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 43: Unit Registration

    (for approx. 2 second) and connection of the se- “Check” lected adaptor can be identified. (Effective only when the status of the Transmission adaptor is normal.) Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 44 All systems connected to 1 Transmission adaptor (U10 USB Network Interface) are stopped during scan- ning for secure reg. VRF network list display during scanning When scan ends, “Done” is displayed at the progressive bar display. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 45 Firmware update of the outdoor unit will be required to perform outdoor unit capacity save function. “OK” button: Saves the detected unit configuration detected by scanning. “Cancel” button: Ends scanning without saving the scanned result. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 46: Description Property Setting

    Values of description properties of all objects within the selected unit can be modified at once.  Select the menu items in order of “Setting”→“Description Property Setting” from the Menu bar.   Up to 50 characters can be entered.   Click the “OK” button. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 47: Change Password

    At the end of an application, at DB importing, etc. the password input screen is displayed the same as up to now. "OK" button: Saves the new password. "Cancel" button: Ends without saving the revised contents. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 48: Display Language Setting

    Press the “Open” button and select the excel file in which the translated words are registered.    Transposition starts when “Change” button is clicked. When the transposition is complete, BACnet ® Gateway ends automatically. Start it manually. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 49: License Manager

    7-11 “License Manager” Select the menu items in order of "Setting" → "License Manager" from the Menu bar. Refer to the “License Manager” manual for details. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 50: Monitoring Unit Setting

    (b) Enter the lower order of VRF address. (high order is 200 only) (c) Enter “Object Instance Number” in order to read in from BACnet Device. Make the number unique in UTY-ABGXZ1. (d) Enter “Object Name” similarly. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 51 N e t w o r k C o n v e r t o r f o r ID Number LONWORKS 200.3 UTY-VLGX 200.4 200.17 15 (Default) 200.18 Service Tool UTY-ASGX/UTY-ASGXZ1 200.90 200.90 Web Monitoring Tool UTY-AMGX/UTY-AMGXZ1 200.91 200.91 Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 52: Electricity Charge Apportionment (Eca) Setting

    1:When ending electricity charge apportionment data collection 2:When starting electricity charge apportionment data collecting by calculation including in- door units 3:When stating electricity charge apportionment data collection by calculation not including indoor units Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 53: Overview

    (11) The apportionment calculation for the electricity charge cannot be performed for air conditioners other than VRF, such as single split type, that are connected to the VRF System via convertors. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 54 Outside the calcu- lation objective VRF System2 Network Convertor VGGX Apportionable range (UTY-VGGX) Network Convertor Electricity charge calculation units VGGXZ1 (UTR-VGGXZ1) V-II or later VRF System Network Convertor YRDA (UTR-YRDA) S/V-VRF System RB Unit Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 55 Therefore, if there is a unit whose power breaker is switched off, quickly recover the power by switching on the breaker. ● This error may also occur when the communication is disrupted due to disconnection of VRF communication line. Check that the communication line is not disconnected. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 56: Model Name And Eca Parameter Setting

    When ECA parameter field is displayed Enter the value in the corresponding field. External Fan Rated Power Consumption: Enter the rated power consumption of the external fan used with DX-Kit.  Click the “OK” button. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 57: Operation

    Operation 9. Operation...

  • Page 58: Operation

    Enter the Login ID.  Enter the Password.     Click the “OK” button. ® When “BACnet Gateway for VRF System” boots up, the main screen is displayed. (Refer to 9-2 Main Screen.) Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 59 Select the menu items in order of “File”→“Exit” from the Menu bar   Enter the Login ID.  Enter the Password.     Click the “OK” button. Click the “OK” button. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 60: Main Screen

    “Outdoor Unit” Unit connected to the adaptor selected by [VRF System] menu. Displays the Status information of the Monitor- “Monitoring Unit” ing Unit connected to the adaptor selected by [VRF System] menu. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 61 Enable” can be set for a Device itself. (Time Duration, Password cannot be set) This setting can be ® set from a BACnet Device (B-OWS, etc.) This value can be overwritten from B-OWS. VRF System0 ® BACnet Device (B-OWS, etc.) ® (BACnet Gateway) VRF System1 VRF System2 VRF System3 Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 62: Data Import/Export

    Select the menu items in order of “File”→“Import/Export”→“Unit List (EDE) Export” from the Menu bar.   Specify the Export destination folder and click “OK”. The folder to be saved shall be created in advance.   When “OK” is clicked, the export is complete.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 63: All Data Import

    Select the menu items in order of “File”→“Import/Export”→“All Data Import” from the Menu bar.   Enter the Login ID.  Enter the Password.     Click the “OK” button. Specify the file to be imported and click “Open”. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 64: All Data Export

    Select the menu items in order of “File”→“Import/Export”→“All Data Export” from the Menu bar.   Specify the export destination folder and click “OK”. The folder to be saved shall be created in advance.   When “OK” is clicked, the export is complete.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 65: View

    Items displayed in the Status List. I.U.=Indoor unit O.U.=Outdoor unit Items Remarks I.U. O.U. M.U. “R.C.Group Name” Remote controller group name  “Unit Group Name” Outdoor group name  “Object Name” Object Name  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 66 (Heat pump of S/V Series only) Note Some units have more than 2 sets of ECA parameter. For such units, model name is suffixed with index number in brackets to distinguish a particular set of ECA parameter. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 67: Control

    Select the menu items in order of “View”→“Unit”→“Indoor Unit” from the Menu bar   Click the unit (line) that you wish to select.   Select the menu items in order of “Control”→“Operation Setting” from the Menu bar Click the button.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 68: Device Communication Disable

    Device communications is disabled. When this setting is performed, communication with the VRF System is not stopped. VRF System0 ® BACnet Device (B-OWS, etc.) ® (BACnet Gateway) VRF System1 VRF System2 VRF System3 Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 69: Device Communication Disable_Initiation

    Select the menu items in order of “Control”→“Device Communication Disable_Initiation” from the Menu bar Click the button.   Click the “OK” button on the window of “Disable initiation of communications” shown below.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 70: Device Communication Enable

    Select the menu items in order of “Control”→“Device Communication Enable” from the Menu bar Click the button.   Click the “OK” button on the window of “Enable device communications” shown below.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 71: Out Of Service

    Select the menu items in order of “Control”→“Out of Service”→“False” from the Menu bar   Click the “OK” button on the window of “All objects will be put in service.” shown below.  Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 72: Error

    Displays “Error Information”  Select the menu items in order of “Error”→“Error Notification” from the Menu bar Automatically opens at error generation.   “Error Notification” screen is displayed. “Error Notification” screen Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 73: Displays "Error History

    “Instruction manual”, “Interface Specification Document”, and Version information of BACnet Gateway is displayed. 96966 Displays “Manual”  Select the menu items in order of “Help”→“Manual” from the Menu bar   “Instruction manual” (this manual) is displayed. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 74: Displays "Interface Specification Document

    Select the menu items in order of “Help”→“Interface Specification Document” from the Menu bar  “Interface Specification Document” is displayed. 96966 Displays Application “Version Information”  Select the menu items in order of “Help”→“Version Information” from the Menu bar  “Version Information” is displayed. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 75: Appendix

    Appendix 10. Product Specifications 11. Error Code Table 12. FAQ...

  • Page 76: Product Specifications

    - Maximum of 4 USB ports are required for Echelon U10 USB Network Interface * Maximum number of required USB ports depends on the applicable system con- figurations. ® ® Software Adobe Reader 9.0 or later Optical drive DVD-ROM drive Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 77: Error Code Table

    System tool external input power meter error System tool inter-process communication error System tool license authentication error System tool server/client communication error System tool hard disk drive capacity error System tool system requirements error System tool time error Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 78: Faq

    In addition, scanning by “secure reg.” is faster than scanning “without secure reg.”. → 7-6 “Unit Registration”. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 79 This question is an example of when the difference of this standby power was larger than the power con- sumed by operation. This is a normal result. Generally, this kind of difference is made small by selecting the model of outdoor unit based on appropriate facility design. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 80 Open the "Initial Setting" screen and check that the IP address/Subnet Mask set to the PC is equal to those set in the "Initial Setting" screen. If these are the same, then check that the LAN cable is connected from the PC to the hub correctly at both ends. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

  • Page 81: Trouble Shooting Bacnet ® Installation

    If the VRF system itself is not working properly, consult the the Service Manuals for VRF system. ® S2.Communication between BACnet Gateway and VRF system is not normal. If the communication within the VRF system is not working properly, consult the Service Manuals for VRF system. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
  • Page 82 What Service is Malfunctioning? If any service cannot be performed on the B-OWS, then packets must be captured to see where and what has gone wrong. Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.

Table of Contents