HIKVISION DS-TCP345-K User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. DS-TCP345-K
  6. User manual

HIKVISION DS-TCP345-K User Manual

Guidance terminal
Hide thumbs Also See for DS-TCP345-K:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual of Network Camera
Guidance Terminal
User Manual
UD.6L0209D0009A01
0

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-TCP345-K

Summary of Contents for HIKVISION DS-TCP345-K

  • Page 1 User Manual of Network Camera Guidance Terminal User Manual UD.6L0209D0009A01...
  • Page 2 Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
  • Page 3 LOSS DATA DOCUMENTATION, CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL...
  • Page 4 User Manual of Guidance System and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
  • Page 5 User Manual of Guidance System more information see: www.recyclethis.info. Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into ‘Warnings’ and ‘Cautions’: Warnings: Serious injury or death may be caused if any of these warnings are neglected.
  • Page 6 User Manual of Guidance System maintenance.) Cautions:  Make sure the power supply voltage is correct before using the camera.  Do not drop the guidance machine or subject it to physical shock.  Do not place the camera in extremely hot, cold temperatures (please refer to the product specification for the operating temperature), dusty or damp environment, and do not expose it to high electromagnetic radiation.

  • Page 7: Table Of Contents

    User Manual of Guidance System Table of Contents Chapter 1 Introduction ..................8 Description ...................... 8 Overview ......................9 1.2.1 Mainboard ........................9 1.2.2 Power Cord ........................10 Installation ....................10 Chapter 2 Product Specification ................ 13 Chapter 3 Activation and Login ................. 14 Network Connection ..................
  • Page 8 User Manual of Guidance System Searching Record Files ..................49 Chapter 7 Log ....................50 Chapter 8 Search ....................52 Chapter 9 Status ....................53 Statistics ..................55 Chapter 10 10.1 Parking Space Information ................55 10.2 LED Guidance Screen Information ..............56...

  • Page 9: Chapter 1 Introduction

    User Manual of Guidance System Introduction Chapter 1 1.1 Description DS-TPM300 guidance terminal, based on the ARM9 processor, is a remarkable intelligent management system used for underground garage. Adopting the parking guidance and vehicle system and being integrated with the switch, the guidance terminal is capable of connecting up to 16 parking cameras, managing the parking videos, and saving the massive videos.

  • Page 10: Overview

    User Manual of Guidance System 1.2 Overview 1.2.1 Mainboard Figure 1-1 Device Interfaces Table 1-1 Device Interfaces Name Description Power Supply 2 Power Interfaces Intranet Interface 8 100M Intranet Interfaces Extranet Interface 4 1000M Extranet Interfaces Optical Port 1 Optical Port 1-ch Audio Input Audio In/Out 1-ch Audio Output...

  • Page 11: Power Cord

    User Manual of Guidance System 1.2.2 Power Cord Figure 1-2 Power Cord Table 1-2 Power Cord Name Description Power Output 220V AC Power Output Air Switch 1 Air Switch Power Input 220V AC Power Input 1.3 Installation Refer to the steps below for installation. Steps: 1.
  • Page 12 User Manual of Guidance System Cover Machine Body Keyhole Disk Slot Figure 1-4 Open the Cover 3. Align the four installation holes on the machine body to the four expansion screws on the wall to hook the camera on the screws. Installation Holes Figure 1-5 Install the Device 4.
  • Page 13 User Manual of Guidance System Strong Current Outlet Hole Weak Current Outlet Hole Strong Current Outlet Hole Weak Current Outlet Hole Figure 1-6 Wiring 5. Configure the device through network with a computer. Close the cover and lock the key to finish the installation. Keyhole Figure 1-7 Lock the Key...

  • Page 14: Chapter 2 Product Specification

    User Manual of Network Camera Chapter 2 Product Specification System Parameters Processor ARM A9 high performance digital media processor Embedded Linux Operating Interface I/O Parameters Video In 16-ch Network Camera In Audio In 1-ch Audio In Audio Out 1-ch Audio Out Alarm In 2-ch Alarm In Alarm Out...

  • Page 15: Chapter 3 Activation And Login

    User Manual of Guidance System Chapter 3 Activation and Login 3.1 Network Connection Note: You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.

  • Page 16: Activate Through Sadp

    User Manual of Guidance System 3.2.1 Activate through SADP Notes: SADP software is enclosed on the compact disc. You can also download it from the company website. Steps: 1. Install SADP software. After launching the SADP software, it automatically searches the online devices every 1 minute from the subnet where your computer locates.
  • Page 17 User Manual of Guidance System Figure 3-3 Creative the Password STRONG PASSWORD RECOMMENDED–A strong password ranges from 8 to 16 characters, and must contain at least two of the following categories: numbers, lowercases, uppercases and special characters. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

  • Page 18: Activate Through Web Browser

    User Manual of Guidance System Figure 3-4 Modify the Parameters 4. Enter the password of the admin account of the device in the Admin Password field and click Modify to modify the parameters. Notes:  When setting IP address, keep the device IP address and the computer IP address in the same network segment.

  • Page 19: Login Via Ie

    User Manual of Guidance System Figure 3-5 Activate through Web Browser 3.3 Login via IE Purpose: You can login the guidance terminal via web browser for further operations such as live view, playback, local configuration, etc. Steps: 1. In the address bar of the web browser, input the IP address of the guidance trerminal, and press the Enter key to enter the login interface.
  • Page 20 User Manual of Guidance System properly and/or lead to other undesirable consequences. 3. Click Login. Figure 3-6 Login Interface 4. You are required to change the default password after first login for security purpose. Click OK to change the password in User Management interface. Figure 3-7 Change the Default Password 5.
  • Page 21 User Manual of Guidance System Figure 3-8 Install the Plug-in 6. After login, the interface is shown as follows: Figure 3-9 Live View Window...

  • Page 22: Chapter 4 Configuration

    User Manual of Guidance System Chapter 4 Configuration Purpose: The parameters, such as protocol, stream type, network, alarm, etc., can be configured through the web browser. Click the Configuration tab to enter the Configuration page. 4.1 Local Configuration Steps: 1. Open the Local Configuration page. 2.

  • Page 23: Remote Configuration

    User Manual of Guidance System Parameter Description Save snapshots C:\Users\TSP Web\PlaybackPics (Default Path) when playback to Save clips to C:\Users\TSP Web\PlaybackFiles (Default Path) Save downloaded C:\Users\TSP Web\DownloadFiles (Default Path) files to 4.2 Remote Configuration 4.2.1 Device Parameters  Device Information You can edit the Device Name and Device No., and view the device Model, Serial No., Firmware Version, Encoding Version, Number of Channels, Number of HDDs, Number of Alarm Input and Number of Alarm Output in the Basic Information...

  • Page 24: Camera Management

    User Manual of Guidance System synchronization (NTP Time Synchronization or Manual Time Synchronization). Figure 4-2 Time Setting NTP: After enabling NTP, the NTP server will synchronize the device time at regular intervals. Click before NTP to enable it, and input the Server Address, NTP Port and Interval.
  • Page 25 User Manual of Guidance System terminal, the IP of camera will be modified to be in the same network segment with the system.  The status of the camera will be Offline if the camera is not connected.  When the camera is connected, the IP address will be allocated according to the network interface of the camera and the fourth number of the host ranges from 2 to 17.
  • Page 26 User Manual of Guidance System Figure 4-5 Modify the Information (2) Custom Protocol  Click Custom Protocol to configure the protocol as follows. Figure 4-6 Protocol Access When the camera is online, you can click Access and a login interface for a camera is linked.

  • Page 27: Camera Settings

    User Manual of Guidance System Figure 4-7 Access Note: you must configure the IP address of parking camera remote host and port before the parking camera data is received by the guidance terminal. 4.2.3 Camera Settings  Display Settings In the Display Settings interface, you can configure the channel name and OSD settings.
  • Page 28 User Manual of Guidance System Figure 4-8 OSD Settings Note: You can drag the name, date, week, time information to any position of the live view window.  Video Settings You can configure the video parameters in the Video Settings interface including stream type, video type, resolution, etc.
  • Page 29 User Manual of Guidance System Parameter Description Channel No. Up to 16 channels. Main Stream (Normal)/Sub Stream/Main Stream (Event) is Stream Type selectable. Video Type Video Stream Resolution 960*720/960*576 is selectable. Bitrate Type Variable/Constant is selectable. Highest/Higher/Medium/Low/Lower/Lowest. By default, it is Video Quality Medium.
  • Page 30 User Manual of Guidance System 2. Check the checkbox of Enable Record Schedule. 3. Click Edit to set the schedule as follows. Figure 4-11 Edit Schedule You can select All Day or Customize to edit the schedule. 4. There are five record types: Continuous, Motion Detection, Alarm, Motion or Alarm and Motion &...
  • Page 31 User Manual of Guidance System Figure 4-12 Advanced Settings 8. (Optional) If you want to copy all the settings to other channels, click Copy to… and select channels, and then click OK. 9. Click Save to save the settings.  Snapshot You can configure the scheduled snapshot and event-triggered snapshot parameters including format, resolution, quality and interval.

  • Page 32: Network Settings

    User Manual of Guidance System 4.2.4 Network Settings The guide terminal is equipped with two network interface cards and you can configure extranet and intranet parameters respectively.  TCP/IP You can configure the IP address of the four 1000M network interface cards. NIC Type: Auto, 10M Half-dup, 10M Full-dup, 100M Half-dup and 100M Full-dup is selectable.
  • Page 33 User Manual of Guidance System network interface cards in the following interface. The default IP address is 192.168.254.1. The eight network interface cards are in the same network segment, which can interact with cameras and up to 16 parking cameras can be accessed.

  • Page 34: Serial Port Settings

    User Manual of Guidance System  Remote Access You can check the checkbox to enable SSH or Telnet in Remote Access interface. Figure 4-17 Remote Access Settings 4.2.5 Serial Port Settings  232 Serial Port 232 serial port parameters are for the RS-232 interface. Please keep the settings as default.

  • Page 35: Alarm Settings

    User Manual of Guidance System Figure 4-19 RS-485 Settings 4.2.6 Alarm Settings  Alarm Input The device support 2-ch alarm inputs. Steps: 1. Select the alarm input No. from the dropdown list and input the alarm name. 2. Select alarm type as NO (Remain Open) or NC (Remain Closed). 3.
  • Page 36 User Manual of Guidance System Figure 4-20 Alarm Input 5. Click Edit to edit the arming schedule time. Figure 4-21 Edit Schedule Time 6. Select Linkage Method tab to set the parameters of Normal Linkage, Trigger Alarm Output, Trigger Channel and PTZ Linking.
  • Page 37 User Manual of Guidance System Figure 4-22 Linkage Method  Alarm Output The device support 2-ch alarm outputs. Refer to the above section Alarm Input for detailed steps. Figure 4-23 Alarm Output  Voice Alarm You can configure Voice Alarm in this interface.

  • Page 38: Control Lamp

    User Manual of Guidance System Steps: 1. Click Add in the Voice Alarm Configuration interface. Figure 4-24 Voice Alarm (1) 2. Select Voice Alarm Type, Voice Alarm Priority and Voice Alarm Times from the dropdown lists, and select Enable Voice Alarm as ON. Click OK to save the settings.

  • Page 39: Exception

    User Manual of Guidance System Figure 4-27 Opposite Space Detection Settings (2) 2. Select camera from the dropdown list. Set opposite TPM-TP address and opposite camera IP address, and select ON or OFF from the Enable dropdown list. Note:  Opposite TPM-TP is another guidance terminal which needs to be controlled. ...

  • Page 40: User Management

    User Manual of Guidance System Figure 4-28 Exception Refer to the following descriptions of Exception Type. Exception Type Description HDD Full All the HDD space is full. Error when writing in the HDD or the HDD is not HDD Error initialize.
  • Page 41 User Manual of Guidance System Figure 4-29 User Management Adding User Steps: 1. Click Add in the User Management interface. 2. Input the user name, password as desired. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, and contains at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 42: Hdd Management

    User Manual of Guidance System 6. Click OK to save the settings or click Back to return to the User Management interface. Modifying User Steps: 1. Select the user account for modifying and click Modify. 2. You can modify the user name, password, level and permission. Note: ...

  • Page 43: Maintenance

    User Manual of Guidance System Note: Initialization removes all the data saved in the HDD. Figure 4-31 HDD Management Interface  Picture Quota You can set the space of the picture by setting Picture Quota, and the rest space will be used to save the record files.

  • Page 44: Remote Host

    User Manual of Guidance System Figure 4-33 Maintenance Notes:  The upgrading file is digicap.dav.  The upgrading process will be 1 to 10 minutes. Please don’t disconnect power to the device during the process.  The device will reboot automatically after upgrading. 4.2.12 Remote Host You can set the remote host parameters for the data uploading in the Remote Host interface.

  • Page 45: Status

    User Manual of Guidance System Figure 4-34 Remote Host 4.2.13 Status You can view the system status in Status interface.  Network Uploading Status You can view the network uploading status to find out if the remote host is enabled. If the status is Disable, you should check if the IP address and other parameters are correctly configured in Remote Host interface.

  • Page 46: Chapter 5 Live View

    User Manual of Guidance System Chapter 5 Live View Click the Live View tab to enter the Live View interface. 5.1 Starting Live View Steps: 1. Open the Live View page. 2. (Optional) Click the icon in the live view toolbar, and select the screen layout mode.

  • Page 47: Ptz Control

    User Manual of Guidance System On the Live View page, the following toolbar buttons are available: Icon Name Description Set the screen layout mode. 4 types of screen layout modes are selectable: 1-Screen, 4-Screen, Set View 9-Screen and 16-Screen. Start the live view of all cameras. Start All Live View Capture the picture in the live view process.
  • Page 48 User Manual of Guidance System Figure 5-3 PTZ Interface Configuring the Preset Perform the following steps to add a preset: 1. Click the Preset button to enter the PTZ preset configuration panel. 2. Click the direction buttons to steer the camera to the desired view. 3.

  • Page 49: Chapter 6 Playback

    User Manual of Guidance System Chapter 6 Playback Purpose: The record files stored on the HDDs on the local device can be searched and played back remotely through the web browser. Click the Playback tab to enter the Playback interface. 6.1 Playback Interface The Playback interface is shown as follows.

  • Page 50: Searching Record Files

    User Manual of Guidance System Icon Name Description Single Frame Play back the record files frame by frame. Stop All Playback Stop the playback of all the cameras. Capture Capture the picture in the playback process. Download the record file for backup. Download Start/Stop Clipping Start/Stop clipping the record files.

  • Page 51: Chapter 7 Log

    User Manual of Guidance System Chapter 7 Log Purpose: You can view and export the log files at any time, including operation, alarm, exception and information of device. Before you start: The Log function can be realized only when the device is connected with HDD or network disk.
  • Page 52 User Manual of Guidance System many log files.

  • Page 53: Chapter 8 Search

    User Manual of Guidance System Chapter 8 Search Purpose: You can search the data such as the license plate number, parking space number, etc., by specifying the search condition in Search interface. Click the Search tab to enter the Search interface. Figure 8-1 Search Interface Steps: 1.

  • Page 54: Chapter 9 Status

    User Manual of Guidance System Chapter 9 Status Purpose: You can view the status of the current working cameras as well as the parking space status. Click Status tab to enter the Status interface. Figure 9-1 Status Interface (1) You can view the camera working status, the parking space information including parking space status, liscence plate, etc.
  • Page 55 User Manual of Guidance System Figure 9-2 Status Interface (2)

  • Page 56: Chapter 10 Statistics

    User Manual of Guidance System Chapter 10 Statistics Purpose: You can view the statistics of parking space information and LED guidance screen information in Statistics interface. Click Statistics tab to enter the Statistics interface. 10.1 Parking Space Information You can view all the parking space information in Parking Space Information tab. Or you can input the following search condition and click Search to search the specified parking space.

  • Page 57: Led Guidance Screen Information

    User Manual of Guidance System Figure 10-1 Statisctics Interface 10.2 LED Guidance Screen Information You can view all the LED guidance screen information in LED Guidance Screen Information tab. Figure 10-2 LED Guidance Screen...
  • Page 58 User Manual of Guidance System...

Table of Contents