Z5552 Bracket connector 1.1 Scope of supply and weight Please verify the shipment for completeness and proper condition of the items. Pos. Qty. d&b Code Description Z5552 Bracket connector including: Spring washer U washer 8.4 Screw nut M8 Screw nut M10 U washer 10.5 Hex head bolt M10 x 25 U washer 5.3...
1.3 Intended use The d&b Bracket connector must only be used to connect two d&b horizontal brackets, e.g. Z5388 VP Horizontal bracket, as described in these mounting instructions. The Bracket connector can be: ▪ flown using a flying adapter with variable vertical and horizontal alignments.
1.5 Assembly Screw Torque [6] Hex head bolt M10 x 25 50 N×m [3] Hex head bolt M8 x 18 15 N×m [8] Allen hex screw M5 x 16 2.5 N×m Note: In order to prevent any damage to the cabinet surface, place the cabinets on soft ground.
Declarations 2.1 Manufacturer's declaration This declaration covers: ▪ d&b Z5552, Bracket connector. National standards and technical specifications applied: DIN 18 800, DIN 1055, DGUV Vorschrift 17. Backnang, 2019-03-22 Frank Bothe, Chief Technology Officer (CTO) d&b audiotechnik GmbH & Co. KG 2.2 Disposal When out of use the rigging components must be disposed of in accordance with the national environmental regulations.