Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
1. Check material received against the packing list. Check the number of packages received and then check the
contents of each package.
2. Check the material received for damage. If damage has occurred, secure a "damage notation" from the carrier
3. Identify each part as it is unpacked and put like parts together as close as possible to the working area where they are
to be assembled.
Be careful to use the correct hardware as specified in the assembly instructions.
4.
In the interest of safety, all lockers must be securely anchored to the floor and/or wall. For safety, handle all components
carefully and wear work gloves when assembling lockers. Install all units plumb and tighten all hardware securely. Retain
instructions for future reference.
TEEN LOCKER
General Instructions
CAUTION
800-252-5633
info@ArtMetalProducts.com
www.ArtMetalProducts.com
Advertisement
Related Manuals for Hallowell HKL151548-1
Summary of Contents for Hallowell HKL151548-1
- Page 1 TEEN LOCKER ASSEMBLY INSTRUCTIONS General Instructions 1. Check material received against the packing list. Check the number of packages received and then check the contents of each package. 2. Check the material received for damage. If damage has occurred, secure a “damage notation” from the carrier 3.
-
Page 2: Package Contents
KIDS LOCKERS ASSEMBLY INSTRUCTIONS - HKL151548-1 PACKAGE CONTENTS ITEM PART # DESCRIPTION QTY. KDHF1548-1LV FRAME/DOOR ASSY. HTLC1515 HOLES NOT USED FOR ASSEMBLY KP1548-HKL SIDE KH1515 HAT SHELF KS1515-HKL BOTTOM KR1548-HKL REAR MBT200 3/8" SLOTLESS BOLTS N201 HEX NUTS N110 DOME HEX NUT... - Page 3 NOTE: FINGER TIGHTEN ALL NUTS, ENSURE UNIT IS SQUARE, THEN TIGHTEN ALL. STEP 2: STEP 1: • Bolt top(2) to the outside • Lay the rear panel on the floor. of the rear and side • Bolt side panels(3) to the inside panels, of the rear panel(6).
- Page 4 NOTE: FINGER TIGHTEN ALL NUTS, ENSURE UNIT IS SQUARE, THEN TIGHTEN ALL. STEP 3: • Bolt the Bottom(5) to the inside of the rear and side panel. • Bolt the Hat Shelf(4) to the inside of the side panels. OPTIONAL SHELF LOCATION STEP 4: •...