Advertisement
Operating the Receiver
Left – This is the volume adjustment for the Left audio channel, in the range of -
6.0 dB to +6.0 dB. Any value can be entered with the numeric keypad (in the
appropriate range), but the UP and DOWN arrows will make increments/
decrements at 0.5 dB steps.
Right – This is the volume adjustment for the Right audio channel, in the range of
-6.0 dB to +6.0 dB. Any value can be entered with the numeric keypad (in the
appropriate range), but the UP and DOWN arrows will make increments/
decrements at 0.5 dB steps.
Stereo/Mono – This setting configures how audio received on the audio input is
handled. Possible options are STEREO (Left and Right are passed directly
through to Left and Right), R-MONO (Right is passed to both the Left and Right),
L-MONO (Left is passed to both the Left and Right), and MIXED (Left is passed
to both the Left and Right, and Right is passed to both the Left and Right).
Audio Decoder - This setting is used to select the audio channel within the stream
when the signal contains more than two audio pairs. The defaults are AUD1 for
audio channel Aud1 and AUD2 for audio channel Aud2. Possible options for the
two stereo audio channels are AUD1 to AUD4.
Note: These settings may be changed/overridden by the uplink.
4006105 Rev B PowerVu D9850 Program Receiver Installation and Operation Guide
25
Advertisement
