Repair - Makita EBH252U Technical Information

6

REPAIR

6-1 Engine and Shaft
6-1-1 Disassembling
Fig. 6-1-1-1
[1] Remove Air cleaner cover.
Air cleaner cover
Shaft
[5] Loosen three Hex socket head
bolts, then separate Shaft from
Clutch case.
Fig. 6-1-1-2
[3] Remove the cylindrical end
of Control cable.
[2] Push to open the throttle portion
of arburetor by a finger.
Fig. 6-1-1-4
Clutch case
7 / 40
[4] Loosen Adjust screw* and then
remove Control cable.
*the component of Control cable
[6] If the end of Shaft is stuck at the
spline engagement, use a waste cloth
Waste
and water pump pliers to pull it out.
cloth
Pliers
Fig. 6-1-1-3
Hammer