Advertisement
Playing a disc
1
OPEN•CLOSE 0
Press
2
Insert a disc with the print side facing up and close the disc door.
3
Playback will start automatically. If not press
4
To stop playback, press 9.
Programming and tuning to radio stations
1
Press
SOURCE (TUNER
2
Press and hold
PROG
available stations in order of waveband.
3
Press
ALBUM/PRESET+/-
preset station is displayed.
Playing a USB mass storage device
With the system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1)
work with this system).
1
Insert the USB device's USB plug into the socket
2
Press
once or more (or
SOURCE
3
Play the USB's audio files as you do with the albums/tracks on a CD.
to open the disc door.
ÉÅ
on the remote) to select tuner source.
for more than two seconds to program all
on the set
orí/ë
on the remote control until the desired
memory cards (requires an additional card reader to
,
USB/MP3 LINK
C Royal Philips Electronics N.V. 2008
.
on the front panel of the main set.
on the remote control) to select USB.
All rights reserved.
http://www.philips.com
Tip
- The system only supports
audio files stored in the USB
device.
PDCC-LL-0820
Advertisement
