NEC Express5800 Series User Manual page 71

Chapter 2 Preparations
5. Remove a screw from the riser card and
remove the blank cover.
6. Attach the RAID Controller to the riser
card.
7. Insert the riser card into the slot of the
motherboard and fix the riser card with
the screw which you removed in step 5.
Position the terminal part of the riser card
in the slot of the motherboard and then
securely insert it.
8. Unscrew the battery bracket securing the
battery.
9. Write down the installation date (year
and month) on the SET UP DATE
LABEL and attach it to the position
shown in the image on the right.
PCIe#1
Low profile side
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
PCIe#2
Low profile side
71