Advertisement
7.
Bind the Room Thermostat to
the Remote access kit by following
the installer instructions – it's a
simple two button procedure.
8.
Visit the
https://mytotalconnectcomfort.
com/portal - create an account
for the household – you will need
the MAC & CRC codes from
the base of the modem.
9.
Download the Honeywell TCC App
and follow the instructions
for entering the account info.
10.
Provide a simple walk through of
the product to the customer. Stress
that it doesn't need the internet
to make it work - Point out you can
do time and temperature scheduling
from the App.
This sheet is for guidance only and at the time of production
represented the latest information available to Honeywell from
various sources. Honeywell reserves the right at any time
and without notice to change any product, specification or any
other information contained in this publication and cannot
accept any responsibility for loss or damage arising out of any
errors that may inadvertently be contained herein. Honeywell
Control Systems, Honeywell House, Skimped Hill Lane,
Bracknell, Berkshire RG12 1EB EN3H-3258 UK01 R0116
1
Connect Remote Access Gateway to power
2
Connect Gateway to home internet router
3
Bind Gateway to wireless Thermostat
Press
1sec
1
Put Gateway into BIND
mode by pressing BIND
button on base
bn
d
Press
once
3
Send BIND signal by pressing
BIND button again
few
secs
5
5
Thermostat will display binding confirmation
+ signal strength (5 = good signal) for a few
seconds before returning to normal operation
01/16
© 2016 Honeywell International Inc.
bn
d
Press
10sec
2
Put Thermostat into BIND
mode by pressing below
and right of display
4
LED on Gateway should turn
solid green (= good signal)
21
.5
LED Status
Advertisement
