Zoom Setup; Collated Copy Setup; Analysis Origin Setup; Contrast Setup - Philips LFF6080/GBB User Manual

Parameter
QUALITY Optimal resolution for
TEXT documents containing text.
Optimal resolution for
PHOTO documents containing
photographies.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the
You can also change the resolution by
Note
pressing the

Zoom setup

The ZOOM parameter allows you to reduce or enlarge an
area of a document by choosing the origin and the zoom
level to apply to the document, from 25 to 400 %.
842 - ADVANCED FCT/COPY/ZOOMING
1 Press , enter 842 using the keypad.
2 Enter the desired
alphanumerical keypad
predefined values with the buttons
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the

Collated copy setup

The COLLATED parameter allows you to assemble or
disassemble your copies.
843 - ADVANCED FCT/COPY/COLLATED
1 Press , enter 843 using the keypad.
2 Select the desired option with the buttons
according to the following table:
Parameter
The printer assembles the copies of
the original document.
E.g.: if you make three copies of a
COLLATED
10-page document, the document is
copied from page 1 to 10 three times
over.
The printer does not assemble the
copies of the original document.
E.g.: if you make three copies of a
UNCOLLATED
10-page document, page 1 is copied
three times, then page 2, then page
3, etc.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the
Signification Icon
button.
button.
zoom level with
or choose among
and .
button.
and
Signification
button.

Analysis origin setup

If you want, you can change the origin of the scanner.
By entering new values for X and Y in mm (X < 209 and
Y < 280), you move the analysed area as shown on the
diagram below.
844 - ADVANCED FCT/COPY/ORIGIN
1 Press , enter 844 using the keypad.
2 Select the X and Y coordinates with the buttons
or .
3 Setup the desired coordinates with the numerical
keypad or the buttons
4 Confirm your choice by pressing the OK button.
5 Quit this menu by pressing the
the

Contrast setup

The CONTRAST parameter allows to choose the
photocopy contrast.
845 - ADVANCED FCT/COPY/CONTRAST
1 Press , enter 845 using the keypad.
2 Setup the desired level of contrast with the buttons
and .
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the

Brightness setup

The BRIGHTNESS parameter allows to lighten or darken
your output.
846 - ADVANCED FCT/COPY/BRIGHTNESS
1 Press , enter 846 using the keypad.
2 Setup the desired brightness with the buttons
and .
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the

Paper type setup

851 - ADVANCED FCT/SCAN. & PRINT/PAPER
1 Press , enter 851 using the keypad.
2 Select the paper NORMAL or THICK that you use
with the buttons
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the
- 21 -
LFF6080
and .
button.
button.
button.
TYPE
and .
button.