Installing/Removing Processor Module - Fujitsu PRIMERGY H200 Manual

Upgrading processors
Figure 38: Removing CPU terminator module
Ê Swing the handle of the CPU terminator module upward (1), and pull the
module out of the slot (2).
Installing is done in the reverse order.
8.5.2

Installing/removing processor module

Figure 39: Installing processor module
Ê Push the processor module into the empty slot with the handle folded up
until the handle guides on the left and right engage in the locking mechanism
(1).
84
System components and expansions
U41147-J-Z156-2-76