Honeywell Z-Wave Series Quick Installation Manual page 26

Quick Installation Guide
Alerts and reminders
Number Alert/Reminder
252 AC Power Lost
405 Battery Low
407 Battery Critical
546 Z-Wave Not
Configured
547 Z-Wave Radio
Error
Definition
If batteries used as backup power it would drain
batteries quickly so Z-Wave communication needs
to be turned off. The working power mode can only
be changed when thermostat is NOT included in
a Z-Wave network. Either to exclude and include
thermostat back in to Z-Wave network to change the
power mode to LSS (power-save, sleep mode) or to
resume AC power. You can check the actual power
mode in the thermostat MENU/DEVICE INFO.
Battery low. Please turn the system mode to off and
replace the batteries.
Battery critical. Thermostat cannot control your
system. Please replace the batteries immediately.
Z-Wave has a not been configured yet to receive
commands from your Z-Wave network. Please follow
steps on how to include thermostat in to Z-Wave
network.
Z-Wave module is not operating. Thermostat cannot
receive commands from your Z-Wave network. Please
contact dealer to replace the thermostat.
26