Clip Mode: Using Foto Talk - Philips CT8558/AWUSATP2 User Manual

Mobile phone
Table of Contents

Advertisement

Philips855_APMEA.book Page 23 Friday, July 9, 2004 1:05 PM
2.
A message will inform you when the camera
preview swaps from the main (internal) screen to
the external one: close the phone, put it down on
its hinges and orient it properly for the picture to
be correctly framed.
3.
Press either side key to launch the count-down.
4.
The count-down starts at -10 seconds (this value
cannot be changed). A beep is played 3 seconds
before the picture is taken, then again when it's
actually shot.
Beep alarms can be customized via the camera
c
settings. At any time, press
to stop the timer and
0
go back to preview mode or press
timer.
5.
Once the picture is shot, follow the instructions
starting at point 2 of the previous section.
With the self-portrait mode
This mode allows you to take a picture of yourself by
holding the phone opened in front of you.
1.
Set the self-timer option
On
(see page 22), press
C
.
C
2.
Place your finger on the
key, then hold the
phone opened at arms length, camera toward
your face.
C
3.
Press the
key to take the picture.
Taking pictures
Number of pictures
The number of pictures you can save in the phone will
vary according to the settings you have configured:
the higher the resolution, the bigger the file size.
A message will warn you if there isn't enough memory
to store the picture you have just taken. In this case,
you must delete data (sounds, images, etc.) before
storing a new picture. Select Multimedia > Memory
status to check the memory available in your phone.

Clip mode: using Foto Talk

Create a clip
to just stop the
Selecting the
Clip
mode before taking a picture allows
you to use the
Foto Talk
a picture + sound clip to send to your friends and
relatives.
1.
When in idle mode, press
camera.
C
2.
Press
again to take the picture; the
window will then open automatically.
sound
3.
Record the sound or message of your choice,
c
press
to cancel or
(you can also wait for the maximum recording
time of 30 seconds to be reached).
feature: a quick way to make
C
to activate the
Record
,
to stop the recording
23

Advertisement

Table of Contents
loading

Table of Contents