Registering One Handset With Several Base Stations; Selecting The Base Station; Removing A Handset - Philips TD6411/BG051P User Manual

Registering one handset with several base stations

To register your handset with a new base station, proceed as for "Registering a
new handset with your base station" on page 24.
Important:
You can register your handset with a maximum of 4 base stations. If your handset
is already registered with 4 base stations, then remove it from one of the base
stations.

Selecting the base station

Even when your handset is registered with two base stations, it is connected to
only one base station at a time. You have to select the base station each time you
want to change the 'active' base station, unless you choose the
the closest base station is automatically detected as soon as the signal of the
previously selected base station is lost.
For example, if you are using your handset with a base station you have named
'Home' and you now wish to make a call on a base station you have named 'Office',
you will have to select it before you can do so.
1
2
3
4

Removing a handset

You can remove any handset that is registered with your base station.
1
2
3
4
5
If the handset that you have removed is the one you are using, it will automatically
switch to its next registered base station.
26
R
Press , then press
+ -
Press or until the name of the base station to which you want to be
connected is displayed, or until
AUTO
mode functions when there is no signal from the base station to the
handset.
o
Press .
Your handset will beep to confirm that it is now searching for the new base
station, or for the closest base station if
R
Press to leave menu mode.
R
Press , then press
- REMOVE HS
Press until
+ -
Press or to select the handset you wish to remove, then press
CODE?
When is displayed, enter the code "RC" which is under the base
station, then press
Your handset will beep to confirm that the handset has been removed.
R
Press to leave menu mode.
Using advanced functions
- BASE SEL
until
AUTO
AUTO
+ SETUP
to display
is displayed, then press
o
.
AUTO
is displayed. Press
is displayed.
was selected.
o
. Press .
o
.
option and
o
.
o
.