Table of Contents
Advertisement
Listening to received messages
E
The
received.
1
2
3
4
Erasing messages
Erasing individual messages
1
2
Erasing all the messages received
1
Personalising your memo recorder
If you have recorded an outgoing message and set the day and time, your memo
recorder is ready for use. However, you can also personalise the settings on your
memo recorder.
The following settings are available:
•
Define a remote control code (
•
Choose the number of times the telephone rings before your memo recorder
picks up (Number of rings). See "Changing the number of rings" on page 16.
•
Decide whether your callers can leave a message (
symbol on the handset screen indicates that new messages have been
r
Press
to enter memo recorder mode.
The day, time and number of messages received are displayed.
The memo recorder plays back the messages automatically.
To handle your messages during playback, use the following keys:
<
Press
to play the current message again.
<
Press
twice to hear the previous message again.
>
Press
to listen to the next message.
s
Press
to stop message playback.
r
Press
to exit memo recorder mode.
r
Press the
key on the handset.
The display shows the day, time and the number of messages received.
The memo recorder plays back the messages automatically.
While listening to the messages, press
plays back the message you want to erase.
A beep confirms that the message has been erased. The number of the
received messages displayed is updated automatically.
r
s
Press
, then
A beep confirms that all the messages have been erased.
See "Entering a remote control code" on page 16.
See "Switching message record on or off" on page 17.
Your Onis Memo recorder (Onis Mémo)
x
. Press and hold
RCC: - - - -
x
when the memo recorder
for 2 seconds.
)
RECORD ON/OFF
).
15
Advertisement
Table of Contents
