Download Print this page

RIDGID 41636 Installation Instructions

2017+ can-am maverick x3 dome light mount

Download this manual

INSTALLATION INSTRUCTIONS

2017+ CAN-AM

DOME LIGHT MOUNT

THANK YOU FOR PURCHASING RIGID PRODUCTS FOR YOUR VEHICLE.

Please read through all of these Instructions and tips before proceeding with the installation.

We do our best to provide a simple installation process for all applications however

Always disconnect any power sources connected to your vehicle

STEP 1

Install the A-Series light onto the RIGID dome light bracket using the provided hardware.

STEP 2

Remove the factory rear view mirror bolt and then install the new RIGID bracket. Re-install the factory

bolt and tighten.

See Figures 2, 2.1

*THIS MOUNT FITS THE FOLLOWING LIGHTS:

(1) A-Series

IMPORTANT

a professional installation is always recommended.

before servicing fuses or electrical systems.

MAVERICK X3

PRODUCT INCLUDES:

(1) Dome Light Mount Bracket #41636

* LIGHTS SOLD SEPARATELY

Page 1 2017+ CAN-AM MAVERICK X3 ® ® DOME LIGHT MOUNT PRODUCT INCLUDES: (1) Dome Light Mount Bracket #41636 * LIGHTS SOLD SEPARATELY *THIS MOUNT FITS THE FOLLOWING LIGHTS: ® (1) A-Series IMPORTANT THANK YOU FOR PURCHASING RIGID PRODUCTS FOR YOUR VEHICLE.
Page 2: Warranty Information
FIGURE 2 FIGURE 2.1 STEP 3 FIGURE 3 Once the mirror bolt is tight, aim light downward and you are finished with the installation. See Figure 3 Wiring: Wire your lights according to the instructions included with the light. Take care to avoid any heat sources and sharp or abrasive surfaces. Your installation is now complete.