Implementation; Implementation Overview; Database Configuration; The Implementation Process - Honeywell Enhanced Micro TDC 3000 User Manual

This section guides you though the configuration and data-entry process for the Enhanced Micro
TDC 3000 system. If you are familiar with the Engineering Personality functions, you may be able
to implement your system with little or no reference to the standard LCN bookset, but in case you
need them; references are provided to the binders and publications that contain the detailed
implementation references and instructions.

4.1 IMPLEMENTATION OVERVIEW

The Enhanced Micro TDC 3000 systems consist of a limited set of equipment and
functions, so the range of implementation tasks is reduced to those supported by the
purchased equipment and options. Therefore, in this implementation section, we describe a
predetermined set of implementation choices and values, some of which are fixed by the
characteristics of the Enhanced Micro TDC 3000 system (for example, node numbers and
node-pair numbers), but most of which you can change to suit your application.

4.1.1 Database Configuration

The following example Enhanced Micro TDC 3000 system databases are described in this
section:
• Network Configuration—Network Configuration File (NCF)
• UCN/APM Box Points and Data Points—Parameter values for UCN and APM Box
Point parameter values, which must be built and loaded before data points can be
built.
• Area Database Configuration—Area database

4.1.2 The Implementation Process

"Implementation" includes the individual startup of the system, as described under 4.2, and
the configuration and entry of the remaining data that defines data points, pictures
(schematics), buttons, Free Format Logs, and user-written programs. You can load all or
part of the prebuilt files or configure the entire system yourself.
For a quick overview of the implementation process, refer to Implementation Overview in
the Implementation/Startup & Reconfiguration - 1 binder. For additional definition and
guidance, see Configuration Data Collection Guide in the Implementation/Startup &
Reconfiguration - 2 binder.
Enhanced Micro TDC 3000 User's Manual

IMPLEMENTATION

4-1
4
Section 4
9/95