Table of Contents
Advertisement
using your electric knife
before first use
The blades are very sharp. Never touch the serrated edge of the blades. To prevent
injury, take care when assembling, disassembling and cleaning.
Never immerse the motor handle, power cord, or mains plug in water or any other
liquid.
Do not use harsh abrasives, chemicals or oven cleaners.
ALWAYS ensure your electric knife is switched off and unplugged from the mains supply
socket before assembling, disassembling or cleaning.
•
Before using your electric knife for the first time wash both blades in warm, soapy water.
Rinse and dry thoroughly.
•
Using a slightly damp cloth or sponge, wipe the motor handle with a mild detergent solution.
Dry thoroughly.
assembling
ALWAYS ensure your electric knife is switched off and unplugged from the mains
supply socket before assembling, disassembling or cleaning.
1.
The two blades have to be assembled before fitting into the motor handle. To do this,
hold the blades by the safety grips and position the slot on one blade over the rivet on the
other blade. This fastens the ends of the blades together whilst still allowing them to move
backwards and forwards during operation.
.
Slide the blades together ensuring they are completely flush.
.
Hold the blades by the safety grips with your thumb and forefinger with the serrated
edges upermost. Hold the motor handle upside down (i.e. with the on/off button facing
downwards) as shown. Slide the blades into the motor handle until both blades click into
place.
Removing the Blades
ALWAYS ensure your electric knife is switched off and unplugged from the mains
supply socket before assembling, disassembling or cleaning.
A.
Press and hold the blade release button.
B.
While holding the blades by the safety grips between your thumb and forefinger, gently pull
them from the motor handle.
8
Advertisement
Table of Contents
