Install Remote Control Battery; Turn On; Set Clock - Philips CEM220X/78 User Manual

6
Place the supplied rubber cushion over the
end of the mounting bolt.
7
Slide the unit into the dashboard until you
hear a click sound.
8
Reconnect the negative terminal of the car
battery.

Install remote control battery

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
•
Risk of decreased battery life! Never mix different brands
or types of batteries.
•
Risk of product damage! When the remote control is not
used for long periods, remove the batteries.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.

Turn on

1
Press to turn on the unit.
• To turn off the unit, press
seconds.

Set clock

1
Press MENU / DISP for 3 seconds.
2
Press or repeatedly to until the
currently time is displayed.
3
Turn clockwise to set hour.
4
Press to confi rm.
5
Turn anti-clockwise to set minute.
6
Press to confi rm.
View clock
1
Press MENU / DISP repeatedly until the
clock is displayed.
for 3
EN 15