Mot - Basic Adjustments - Bosch MOT 240 Operating Instructions Manual

After change-over to curve measurement
F1/2: Selection of the memorized pictures (max. 32)
The last picture stored is always indicated under
position 1. The picture position with the highest number
(e.g.: max. 32) indicates the first picture stored.
F3: Change-over between normal representation and curve
measurement
F4: Change-over between arrow upwards and arrow
downwards
the arrow shows upwards: voltage or current
measurement absolute (peak values with reference to
the zero line) and measurement of time, degrees or %
(the distance with reference to the arrow downwards is
measured).
the arrow shows downwards: measurement of time,
degrees or % (the distance with reference to the arrow
upwards is measured).
F5/6: Switching: forwards or backwards/motion every time for
the activated arrow.
Example: measurement of the combustion time and of the combustion
voltage of the cylinder 1
6.

MOT - Basic adjustments

Selection with the softkey F6 „MOT" in basic picture
Depending on the language version of the program module PPG.
Configuration menu:
F1: Calling the sub-program „Record printer" to select the
mode of printing and to enter the workshop address or the
AU check number (see sections 6.1 and 6.2).
F2: Switching over of the temperature indication of °Celsius to
°Fahrenheit and vice versa. The new setting is not stored
until the hardkey „Return" O is pressed.
F3: Switching over of the engine speed in 1/min in rpm and vice
versa. The new setting is not stored until the hardkey
„Return" O is pressed.
F5/6: „Selection of the language for record printer and information
texts". The new setting is not stored until the hardkey
„Return" O is pressed.
89