Operating Procedures; Product Features; Product Structure; Installation Instructions - Philips AWH1110 User Manual

2 Operating procedures

Ensure all the piping connection without leakage before turning on the
electric power of the heater.
Make sure that the tank is fully lled up with water, otherwise the heating
elements will be damaged.
Turn on the main electrical power supply and then adjust the temperature
knob clockwise for higher temperature and anti-clockwise for lower
temperature.
During the heating process, it's normal to see a slight drip at the safety
valve. Please do not cover up the safety valve outlet.
Connect this outlet with a discharge pipe. Water may drip from the pipe,
therefore please keep it exposed to the atmosphere.
The safety valve is to be released regularly (preferably at least every six
months) to remove lime deposit and to ensure that it is not blocked.

3 Product features

Unique pro le.
Sapphire golden silicon tank which is rust-proof, erosion-proof and with
higher e ciency and having a longer life span.
Energy saving with minimum heat loss. The water temperature is able to
be maintained up to 48 hours after the electricity is switched o .
02

4 Product structure

Machine body
Temperature
control knob
Power indicator
Hot water outlet
AWH1120
AWH1121H/90 AWH1121B/90 AWH1122H/90 AWH1122B/90
Machine body
Temperature
control knob
Heating indicator
Hot water outlet
Diagram 3
AWH1110

5 Installation instructions

The installation for electrical and plumbing work must be operated by
quali ed personnel, according to the installation instructions and in
compliance to the local authority regulations.
Unit has to be installed as near as possible to the service points, in order
to reduce heat loss along the pipes. To facilitate maintenance, allow a
distance of 50cm for easy access to the electrical parts.
This electrical water heater should be mounted on a solid cement wall,
preferably where it is close to the power source and water source.
Heating indicator
Cold water inlet
Diagram 3
AWH1121 AWH1122
Cold water inlet
AWH1111
03