Page 3
CONTROLS TOP AND FRONT PANELS 1 VOLUME - adjusts the volume level 2 DBB (Dynamic Bass Boost) - enhances the bass 3 POWER slider - selects the sound source for CD/ TUNER/ TAPE/ and also switches the set off 4 Function indicators - lights up if the respective CD, tape or tuner function is in use 5 Display - shows the status of the set 6 p - 3.5 mm stereo headphone socket...
Whenever convenient, use the AC mains supply if you want to conserve battery life. Make sure you remove the plug from the set and wall socket before inserting batteries. BATTERIES (OPTIONAL) 1. Open the battery compartment and insert six batteries, type R-20, UM-1 or D-cells, (preferably alkaline) with the correct polarity as indicated by the "...
1. Turn VOLUME to the desired level. 2. Adjust the DBB control to select dynamic bass boost on or off. PHILIPS demo mode 1. Press the CD STOP 9 button for 5 seconds. ™ After about 30 seconds, PH..IL ..IPS scrolls across the display.
TUNING TO RADIO STATIONS 1. Select TUNER source. ™ The function indication lights up. and then the radio station frequency is shown. 2. Press BAND once or more to select your waveband. 3. Press SEARCH ∞ or § and release when the frequency in the display starts running.
CD PLAYER Playing a CD 1. Select CD source. ™ is displayed briefly and the function indication lights up. 2. Press OPEN•CLOSE to open the CD door. ™ Display: when you open the CD door. 3. Insert a CD or CD-R(W) with the printed side facing up and close the CD door.
Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM. SHUFFLE - tracks of the entire CD/ programme are played in random order SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme continuously in random order REPEAT ALL - repeats the entire CD/ programme...
CD PLAYER Erasing a programme You can erase the programme by: – pressing STOP 9 once in the STOP position; – pressing STOP 9 twice during playback; – pressing the CD door open; – switching to another source: TAPE/TUNER. • The display shows ' CD player and CD handling •...
GENERAL INFORMATION ON RECORDING • Recording is permissible insofar as copyright or other rights of third parties are not infringed. • This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording, use only NORMAL type cassettes (IEC I) on which the tabs have not been broken.
RECORDING Recording from the radio 1. Tune to the desired radio station (see Tuning to radio stations). 2. Press STOP•OPEN 9/ to open the cassette door. 3. Insert a suitable cassette into the cassette deck and close the cassette door. 4.
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee.