Clock; Timer - Philips FW396C/22 User Manual

RECORDING
CD Synchro Start Recording
1 Load a blank tape into tape deck 2 and a
disc into the disc tray.
2 Press CD to select CD mode .
™ You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If not, the
tracks are recorded according to the
selected disc.
3 Press RECORD to start recording.
™ REC flag starts flashing.
• CD will start playback automatically.
4 Press STOP Ç to stop recording.
Recording from other sources
(only on tape deck 2)
1 Load a blank tape into tape deck 2.
2 Press CD, TUNER or AUX.
• Start playback of the selected source.
3 Press RECORD â to start recording.
™ REC flag starts flashing.
4 Press STOP Ç to stop recording.
Note:
– During recording, it is not possible to
listen to another sound source.
Untitled-1 19

CLOCK

STEREO REC DBB
OPTIMAL JAZZ I S
NEWS HSD
REPLAY FM MW LW AM
DSC DBB
REPEAT SHUFFLE
PROGRAM

TIMER

TECHNO ROCK
DIGITAL SOUND CONTROL
CD TUNER TAPE
CD 1 • 2 • 3 BAND TAPE 1 • 2
STANDBY . ON
DUBBING
TUNING DEMO
NORM•FAST RECORD A. REPLAY
SEARCH
STOP•CLEAR PLAY PAUSE
View Clock
You can view the clock (if it is set) at
standby or any source mode. It will be
displayed for about 7 seconds.
• Press CLOCK/TIMER briefly.
™ "10:25" (the current time) will be
displayed.
™ "--:--" will be displayed if the
clock is not set.
Clock Setting
The clock is set in 24-hour mode, e.g.
"00:00" or "23:59". Before setting the
clock, you must be in the View Clock mode.
1 Press CLOCK/TIMER to select clock
mode.
™ "00:00" or the current time starts
flashing.
™ "à , á , í , ë, Ç " light up.
RDS NEWS!
INCREDIBLE SURROUND
PM MAX CLOCK
TIMER PROGRAM
MASTER VOLUME
AUX
VIDEO
PRESET
n
PREV NEXT
2 Set the hour with à or á.
3 Set the minute with í or ë.
4 Press CLOCK/TIMER again to store the
setting.
™ The clock starts running.
• To exit without storing the setting, press
Ç.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
– To set the time with RDS clock, see
"Receiving RDS Radio Station" under
TUNER section.
6/15/00, 2:05 PM
TIMER
Timer Setting
• The system can switch on to CD,
TUNER or TAPE 1 mode automatically at
a preset time. It can serve as an alarm
to wake you up. After half an hour from
the preset time, the system will return
to the standby mode if no button is
pressed.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will be at
the last setting before the set is
switched to standby mode.
1 Press and hold CLOCK/TIMER for more
than 2 seconds to select timer mode.
™ "ON 00:00" or the last set timer
starts flashing. The TIMER flag
flashes.
™ The last selected source is lighted
while other available sources are
flashing.
™ "à , á , í , ë, Ç" light up.
2 Press CD, TUNER or TAPE to select the
desired source.
3 Press à or á to set the hour for the
timer to start.
4 Press í or ë to set the minute for
the timer to start.
3139 116 19271
19