Preparation For Recording; One Touch Recording; Cd Synchronised Start Recording - Philips MCM9/33 User Manual

Tape Operations/Recording
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.

Preparation for recording

1
Press TAPE.
2
Load a recordable tape into the tape deck.
3
í ë
Press or on the remote to select the
recording tape side.
A appears on the display for the reverse
side.
B appears on the display for the forward
side.
4
Press TAPE A/R on the remote repeatedly
to select a recording mode.
å for recording on one side only.
∂ for recording on both sides. ∂ ∂
∂ ∂
5
Prepare the source to be recorded.
CD – load the disc.
TUNER – tune to the desired radio station.
AUX/CDR – connect external equipment.
When recording is in progress
starts flashing.
REC
It is not possible to change tape side.
It is not possible to listen to another source.
It is not possible to activate the timer
function.
18

One touch recording

1
Press CD, TUNER or AUX to select the
recording source.
2
Start playback of the selected source.
3
Press REC until
REC
the display panel to start recording.
To stop recording
Press Ç on the system.
Helpful Hint:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" will appear.

CD Synchronised start recording

1
Press CD.
If you want to start recording from a desired
í
track, press or
main set).
You can programme the tracks in the order
you want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press REC to start recording.
The disc will start playback automatically.
To select another track during
recording
1
Press É Å to interrupt recording.
2
í or ë
Press to select the desired track.
3
Press É Å to resume recording.
To stop recording
Press Ç.
Recording and disc playback will stop
simultaneously.
icon starts flashing on
ë
( or on the
S T